Search
Find your tractor.
Menu ☰
Years in Production / Production years not listed
Upton
180
Explore the specifications, hardware, and original references for the Upton 180.
180hp
Source index power
2WD Only
Drive
Production years not listed
Production years
Upton
Manufacturer
180 / 01
At a glance
Production
Standard-tread tractor
Built in Corowa, New South Wales, Australia
- Manufacturer
- Upton
Hydraulics
- Pressure
- 2500 psi172.4 bar
- Total Flow
- 20 gpm75.7 lpm
Mechanical
Two-wheel drive
180 / 02
Under the hood
Engine Detail
Nissan UD43
diesel
4-cylinder
liquid-cooled
Two-stroke diesel engine.
- Displacement
- 302 ci4.9 L
- Bore Stroke
- 4.33x5.118 inches110 x 130 mm
- Power
- 180 hp134.2 kW
- Compression Ratio
- 16:1
- Rated Rpm
- 2400
- Torque
- 458 lb-ft621.0 Nm
- Torque Rpm
- 1400
- Fuel Type
- diesel
- Cylinders
- 4
- Cooling
- liquid-cooled
180 / 03
Gears & controls
Transmission
The Upton 180 used military-surplus gear boxes. The first gearbox offered four-forward and one-reverse speed. The second gearbox offered five-forward and one-reverse gear. This arrangement offered 21 forward and nine reverse gear combinations. The original rear gearbox was a Spicer from the LVT-4 landing craft. Later, Mack gearboxes from the M3 tank were used.
- Gears
- 21 forward and 9 reverse
180 / 04
Size. Stance. Footprint.
Dimensions
- Length
- 180 in457 cm
- Width
- 153.75 in390 cm
- Height
- 88 in223 cm
- Ground clearance
- 16 in40 cm
Dimensions And Tires
- Weight
- 18500 lbs8391 kg
- Front Tire
- 11.00x16
- Rear Tire
- 18.4x34
Tires And Tracks
- Front Ag
- 11.00x16
- Rear Ag
- 18.4x34
- Rear Ag
- 18.4x38